All public logs

Combined display of all available logs of Photonicat Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)

• 12:50, 28 October 2024 C2h2 talk contribs uploaded File:Photonicat VM.png
• 12:50, 28 October 2024 C2h2 talk contribs created page File:Photonicat VM.png
• 12:46, 28 October 2024 C2h2 talk contribs created page Photonicat Debian + Virtual Machine (Created page with "==Install libvirtd== Install libvirtd using APT (require root privilege): <pre> apt-get install libvirt-daemon libvirt-clients bridge-utils </pre> ==Add user to libvirtd== This operation require root privilege. <pre> #Replace photonicat to your user name if you changed user name. usermod -a -G libvirt photonicat </pre> Then reboot to apply changes. ==Example: Run OpenWRT on libvirtd== The operations below require root privilege. ===Setup Network=== Add bridge configu...")
• 16:35, 22 August 2024 Xiaobian1 talk contribs created page Photonicat Debain/Ubuntu (Created page with "Debian 10以上版本对于想要开发应用的客户，可以通过SD卡启动，或通过A-to-A刷机。 images可以在 https://dl.photonicat.com/ 下载。。可参考Photonicat_刷机操作手册 进行刷机。 Debain 10以上版本可以支持NPU AI加速、QT、或其他应用。 Ubuntu 2204以上版本支持多种编程语言和开发工具，可通过A-to-A刷机。images可以下载：https://dl.photonicat.com/images/rk3568-photonicat-mainline-ubuntu2204-mi...")
• 13:38, 21 August 2024 C2h2 talk contribs moved page PMU Protocol to Photonicat MCU 通讯协议
• 12:06, 21 August 2024 Monstercat talk contribs created page PMU Protocol (Created page with "===物理层协议=== *通过串口通讯，115200波特率，校验位无，数据位8位，停止位1位 ====帧格式表==== {| class="wikitable sortable" |- ! 起始位 !! 数据位 !! 校验位置 !! 结束位置 |- |0xA5,一个字节长度||见数据位表，变长||数据位（从数据位开始到数据位结束）的CRC校验，2个字节长度，低位在前，高位在后||0x5A，一个字节长度 |} =====数据位表===== {| class="wikitable sortable" |-...")
• 17:28, 15 August 2024 Xiaobian1 talk contribs uploaded File:微信图片 2024.png
• 17:28, 15 August 2024 Xiaobian1 talk contribs created page File:微信图片 2024.png
• 17:20, 15 August 2024 Xiaobian1 talk contribs uploaded File:微信图片 20221020160248.jpg
• 17:20, 15 August 2024 Xiaobian1 talk contribs created page File:微信图片 20221020160248.jpg
• 17:18, 15 August 2024 Xiaobian1 talk contribs created page File:微信图片 20220923122543.jpg
• 17:18, 15 August 2024 Xiaobian1 talk contribs uploaded File:微信图片 20220923122543.jpg
• 12:34, 8 August 2024 Xiaobian1 talk contribs created page Photonicat Openwrt Docker/istore (Created page with "*因其复杂和稳定性官方openwrt固件暂时不支持Docker/istore，用户可自行下载安装第三方的Docker/istore，且内核仅支持6.1.08，但不保证其兼容性和稳定。 *在Debian固件可支持Docker")
• 12:27, 30 May 2024 Xiaobian1 talk contribs created page Photonicat 使用注意事项 (Created page with "===光影猫使用注意事项=== 1.光影猫为 CNC 铝壳被动散热，无内置风扇，所以外壳发热属正常现象。夏季正常工作使用下主板温度 45℃左右，如有用户对温度比较敏感， 可选择低功率的 USB 散热风扇使用连接光影猫使用，最终温度可控制在 30-40℃。如果功率较大则需要外接电源使用。 2.光影猫在一定程度上对电源会有所挑剔。并不是所有的电源都可以稳定使用...")
• 12:12, 30 May 2024 Xiaobian1 talk contribs created page Photonicat Open Wrt固件更新指南 (Created page with "===光影猫6.1.X内核固件更新指南=== *机器短按三下长按15秒进入烧录模式(第一个LED等为快闪状态) ::*参见Photonicat 快速上手#Photonicat 按键配置 *用A to A的USB线连接光影猫和电脑，需先进入烧录模式再连接USB线 File:burn-usb-port-wiki.png 500px File:burn-usb-line-wiki.png 500px *下载最新烧录工具版本最新烧录工具 ::*[https://dl.photonicat.com/tools/RKDevTool Release_v2.86.zip RKDevTool_Re...")
• 11:41, 30 May 2024 Xiaobian1 talk contribs created page Photonicat 使用建议 (Created page with "1.光影猫为 CNC 铝壳被动散热，无内置风扇，所以外壳发热属正常现象。常温使用下主板温度 45℃左右。 如有用户对温度比较敏感，可选择低功率的 USB 散热风扇连接光影猫使用，如果功率较大则需要外接电源使用， 最终温度可控制在 30-40℃ *慎用半导体制冷风扇，温度上升会产生冷凝水导致机器损坏 2.光影猫在一定程度上对电源会有所挑剔。并不是所有的...")
• 10:26, 30 May 2024 Xiaobian1 talk contribs created page Photonicat 固件更新指南 (Created page with "刷机指导可以参考：Photonicat 刷机操作手册")
• 10:23, 30 May 2024 User account Xiaobian1 talk contribs was created by C2h2 talk contribs
• 12:25, 28 September 2023 Monstercat talk contribs created page Photonicat 编译 Android (Created page with "==Create Debian System Image (Rockchip Official)== ===Host System Requirements=== Debian 11 (bullseye) or above, Ubuntu 20.04 or above. ===Compiling Requirements=== On Debian/Ubuntu systems, install the packages: <pre> sudo apt-get install build-essential flex bison genext2fs </pre> ===Get Repo files by tarball(with .git)=== wget https://dl.photonicat.com/repos/rk3568-android12-20230926.tar.xz ===Config build target=== Run the command below: <pre> echo "ROCKCHIP_DEV...")
• 11:56, 18 August 2023 Monstercat talk contribs created page MCU 控制协议 (Created page with "= 通讯协议 = == RK3568 与 电源充电控制板卡通讯协议 == ===物理层协议=== * 通过串口(ttyS4)通讯，115200波特率，校验位无，数据位8位，停止位1位 ====帧格式表==== {| class="wikitable sortable" |- ! 起始位 !! 数据位 !! 校验位置 !! 结束位置 |- |0xA5,一个字节长度||见数据位表，变长||数据位（从数据位开始到数据位结束）的CRC校验，2个字节长度，低位在前，高位在后||0x5A...")
• 15:30, 8 June 2023 User account Monstercat talk contribs was created by C2h2 talk contribs
• 12:35, 5 June 2023 C2h2 talk contribs created page Photonicat 下调CPU频率 (Created page with "==Powersave 模式== 命令行输入： <pre> #! /bin/bash cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor for file in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do echo "powersave" > $file; done cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor </pre> ==CPU 关闭部分核心== <pre> echo 0 > /sys/devices/system/cpu/cpu1/online echo 0 > /sys/devices/system/cpu/cpu2/online echo 0 > /sys/devices/system/cpu/cpu3/online </pre>")
• 15:51, 26 May 2023 C2h2 talk contribs created page Photonicat 硬件配置表 (Created page with "==2022-09 ～ 2022-04== {| class="wikitable" !colspan="5"|Photonicat光影猫 配置表 |- |align="center" width="150px" | 规格 || align="center" width="200px" | 家庭版 Home || align="center" width="200px"| 移动版 Cell|| align="center" width="200px"| 4G版 || align="center" width="200px"| 5G版 |- | CPU || align="center" colspan="4"|瑞芯微 RK3568（4核 Cortex®-A55 @ 2.0GHz), ARM Mali-G52, NPU 0.8Tops |- | 内存 || align="center" colspan="4"|标配：1GB...")
• 10:17, 22 May 2023 User account Superlynx talk contribs was created by C2h2 talk contribs
• 14:24, 4 May 2023 Wangshuyi talk contribs created page File:No-battery-wiki.png
• 14:24, 4 May 2023 Wangshuyi talk contribs uploaded File:No-battery-wiki.png
• 14:23, 4 May 2023 Wangshuyi talk contribs created page 无电池改装 (Created page with "= 无电池改装 = #删除B1(下图红框内） #增加电感（下图蓝框内） 2.2uH 4mmx4mm 饱和电流>3A File:no-battery-wiki.png")
• 19:19, 21 April 2023 Wangshuyi talk contribs uploaded File:Windows-burn-01-wiki.png
• 19:19, 21 April 2023 Wangshuyi talk contribs created page File:Windows-burn-01-wiki.png
• 19:30, 20 April 2023 Wangshuyi talk contribs created page File:Windows-burn-00-wiki.png
• 19:30, 20 April 2023 Wangshuyi talk contribs uploaded File:Windows-burn-00-wiki.png
• 15:03, 27 March 2023 Wangshuyi talk contribs created page File:Wan2lan 1.png
• 15:03, 27 March 2023 Wangshuyi talk contribs uploaded File:Wan2lan 1.png
• 15:03, 27 March 2023 Wangshuyi talk contribs created page File:Wan2lan 0.png
• 15:03, 27 March 2023 Wangshuyi talk contribs uploaded File:Wan2lan 0.png
• 14:59, 27 March 2023 Wangshuyi talk contribs created page Photonicat WAN口设置成LAN (Created page with "#进入<code>openwrt</code>网络->接口设置界面 #点击LAN接口修改 #在物理设置页面勾选<code>以太网适配器"eth0"</code>，点击<code>保存&应用</code> #删除原WAN和WAN6接口（如不删除亦可修改WAN和WAN6接口设置，参见<code>步骤5</code>） #在防火墙设置中勾选lan，点击<code>保存&应用</code> #设置完成后重启生效")
• 17:07, 13 March 2023 Wangshuyi talk contribs created page Photonicat 6.1.8内核版本回退4.19版本说明 (Created page with "===6.1.8内核版本回退4.19版本说明=== #回退版本需要使用USB线刷 #线刷完成后启动，然后使用tty登录，格式化分区/dev/mmcblk0p5，指令<code>mkfs.vfat /dev/mmcblk0p5</code> #重启")
• 12:48, 13 March 2023 C2h2 talk contribs uploaded File:Samba4 r23.jpeg
• 12:48, 13 March 2023 C2h2 talk contribs created page File:Samba4 r23.jpeg
• 21:33, 28 February 2023 C2h2 talk contribs created page Photonicat 功耗测试记录 (Created page with " {| class="wikitable" !colspan="5"|Photonicat光影猫 功耗测试记录 |- |align="center" width="150px" | 配置 Device || align="center" width="200px" | 静态功耗 Idle Power|| align="center" width="200px"| 测速功耗 Speedtest Power |- | Photonicat 无模块，无PCIE ||align="center" | 1.6w-1.8w || align="center" | 不适用 |- | Photonicat + PCI-e WiFi6 || align="center" | 2.2w-2.4w || align="center" | 不适用 |- | Photonicat + 5G 500U|| align="center" |...")
• 14:39, 31 January 2023 C2h2 talk contribs uploaded File:Shutdown voltage updated.png
• 14:39, 31 January 2023 C2h2 talk contribs created page File:Shutdown voltage updated.png
• 14:10, 31 January 2023 C2h2 talk contribs created page File:Shutdown voltage.png
• 14:10, 31 January 2023 C2h2 talk contribs uploaded File:Shutdown voltage.png
• 13:55, 31 January 2023 C2h2 talk contribs created page Photonicat 自动关机电压修改 (Created page with "光影猫采取电池直接驱动4G/5G模块，针对RM500U 模块，若电压低于3600mV(3.6v), 光影猫为了系统稳定性，会自动执行安全关机。然而如果是其他模块，可能关机电压可以更低。通过修改 <code>/etc/pcat-manager.conf <conf> 适用于：2023年1月以及之前的版本。")
• 15:26, 24 January 2023 C2h2 talk contribs created page Photonicat 刷Modem模块固件 (Created page with "=Modem Firmware Update= Please DON'T POWER OFF the device during the firmware updating! And make sure the device has enough battery power to finish the updating (above 50%). ===Quectel EM05=== cd /tmp wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz tar -xzf Quectel-EM05-update.tar.gz cd Quectel-EM05-update ./update.sh ===Quectel RM500U=== cd /tmp wget https://dl.photonicat.com/firmware/RM500U-update.tar.gz tar -xzf RM500U-update.tar.gz cd R...")
• 14:10, 4 January 2023 Wangshuyi talk contribs created page File:Wifi-br-new-04.png
• 14:10, 4 January 2023 Wangshuyi talk contribs uploaded File:Wifi-br-new-04.png
• 14:10, 4 January 2023 Wangshuyi talk contribs created page File:Wifi-br-new-03.png
• 14:10, 4 January 2023 Wangshuyi talk contribs uploaded File:Wifi-br-new-03.png

(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)