All public logs

Combined display of all available logs of Photonicat Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)

• 12:50, 28 October 2024 C2h2 talk contribs created page File:Photonicat VM.png
• 12:50, 28 October 2024 C2h2 talk contribs uploaded File:Photonicat VM.png
• 12:46, 28 October 2024 C2h2 talk contribs created page Photonicat Debian + Virtual Machine (Created page with "==Install libvirtd== Install libvirtd using APT (require root privilege): <pre> apt-get install libvirt-daemon libvirt-clients bridge-utils </pre> ==Add user to libvirtd== This operation require root privilege. <pre> #Replace photonicat to your user name if you changed user name. usermod -a -G libvirt photonicat </pre> Then reboot to apply changes. ==Example: Run OpenWRT on libvirtd== The operations below require root privilege. ===Setup Network=== Add bridge configu...")
• 13:38, 21 August 2024 C2h2 talk contribs moved page PMU Protocol to Photonicat MCU 通讯协议
• 10:23, 30 May 2024 User account Xiaobian1 talk contribs was created by C2h2 talk contribs
• 15:30, 8 June 2023 User account Monstercat talk contribs was created by C2h2 talk contribs
• 12:35, 5 June 2023 C2h2 talk contribs created page Photonicat 下调CPU频率 (Created page with "==Powersave 模式== 命令行输入： <pre> #! /bin/bash cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor for file in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do echo "powersave" > $file; done cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor </pre> ==CPU 关闭部分核心== <pre> echo 0 > /sys/devices/system/cpu/cpu1/online echo 0 > /sys/devices/system/cpu/cpu2/online echo 0 > /sys/devices/system/cpu/cpu3/online </pre>")
• 15:51, 26 May 2023 C2h2 talk contribs created page Photonicat 硬件配置表 (Created page with "==2022-09 ～ 2022-04== {| class="wikitable" !colspan="5"|Photonicat光影猫 配置表 |- |align="center" width="150px" | 规格 || align="center" width="200px" | 家庭版 Home || align="center" width="200px"| 移动版 Cell|| align="center" width="200px"| 4G版 || align="center" width="200px"| 5G版 |- | CPU || align="center" colspan="4"|瑞芯微 RK3568（4核 Cortex®-A55 @ 2.0GHz), ARM Mali-G52, NPU 0.8Tops |- | 内存 || align="center" colspan="4"|标配：1GB...")
• 10:17, 22 May 2023 User account Superlynx talk contribs was created by C2h2 talk contribs
• 12:48, 13 March 2023 C2h2 talk contribs created page File:Samba4 r23.jpeg
• 12:48, 13 March 2023 C2h2 talk contribs uploaded File:Samba4 r23.jpeg
• 21:33, 28 February 2023 C2h2 talk contribs created page Photonicat 功耗测试记录 (Created page with " {| class="wikitable" !colspan="5"|Photonicat光影猫 功耗测试记录 |- |align="center" width="150px" | 配置 Device || align="center" width="200px" | 静态功耗 Idle Power|| align="center" width="200px"| 测速功耗 Speedtest Power |- | Photonicat 无模块，无PCIE ||align="center" | 1.6w-1.8w || align="center" | 不适用 |- | Photonicat + PCI-e WiFi6 || align="center" | 2.2w-2.4w || align="center" | 不适用 |- | Photonicat + 5G 500U|| align="center" |...")
• 14:39, 31 January 2023 C2h2 talk contribs created page File:Shutdown voltage updated.png
• 14:39, 31 January 2023 C2h2 talk contribs uploaded File:Shutdown voltage updated.png
• 14:10, 31 January 2023 C2h2 talk contribs created page File:Shutdown voltage.png
• 14:10, 31 January 2023 C2h2 talk contribs uploaded File:Shutdown voltage.png
• 13:55, 31 January 2023 C2h2 talk contribs created page Photonicat 自动关机电压修改 (Created page with "光影猫采取电池直接驱动4G/5G模块，针对RM500U 模块，若电压低于3600mV(3.6v), 光影猫为了系统稳定性，会自动执行安全关机。然而如果是其他模块，可能关机电压可以更低。通过修改 <code>/etc/pcat-manager.conf <conf> 适用于：2023年1月以及之前的版本。")
• 15:26, 24 January 2023 C2h2 talk contribs created page Photonicat 刷Modem模块固件 (Created page with "=Modem Firmware Update= Please DON'T POWER OFF the device during the firmware updating! And make sure the device has enough battery power to finish the updating (above 50%). ===Quectel EM05=== cd /tmp wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz tar -xzf Quectel-EM05-update.tar.gz cd Quectel-EM05-update ./update.sh ===Quectel RM500U=== cd /tmp wget https://dl.photonicat.com/firmware/RM500U-update.tar.gz tar -xzf RM500U-update.tar.gz cd R...")
• 16:42, 25 December 2022 C2h2 talk contribs created page Photonicat Modem 配置USB3.0 (Created page with "2022年12月17日及以后版本，默认modem 连接采用USB2.0 模式。 如果需要配置成USB3.0 可以通过dd命令把boot 分区修改，重启，已完成修改。 ==通过openwrt命令行== <code> cd /tmp dd if=/dev/mmcblk0p3 of=/root/backup-p3.img bs=1M #备份p3分区 wget https://dl.photonicat.com/images/rk3568-photonicat-openwrt-boot-modem-usb30-202212171614.img.gz #日期需要对应image 日期。如20221217 image，需要boot-modem-usb30-20221217 zca...")
• 18:53, 5 December 2022 C2h2 talk contribs created page File:Firewallv6.png
• 18:53, 5 December 2022 C2h2 talk contribs uploaded File:Firewallv6.png
• 18:52, 5 December 2022 C2h2 talk contribs created page File:Dhcpv6.png
• 18:52, 5 December 2022 C2h2 talk contribs uploaded File:Dhcpv6.png
• 18:51, 5 December 2022 C2h2 talk contribs created page Photonicat IPv6 Native, NAT6模式 (Created page with "==简介== 由于IPv4地址数量有限32bit，IPv6提供了128bit地址。理论上可以给地球上所有设配提供独立地址。甚至于地球上每粒沙提供几百亿个地址。 IPv6 有Native，NAT6模式。openWRT提供hybrid模式<br> *Native(Rely、中继模式、直连模式)模式下：路由器可以给所有设备分配全球独立的IPv6地址，外网可以通过此IPv6地址，直接连接你设配的地址，端口全部暴露在公网中。 例...")
• 14:57, 23 November 2022 C2h2 talk contribs created page Photonicat Tips 使用技巧 (Created page with "* Wi-Fi：5GHz 速率比较快，2.4GHz 兼容所有传统设备。")
• 14:22, 18 November 2022 C2h2 talk contribs created page Photonicat DIY 注意事项 (Created page with "==电池== 原厂电池为18650 3400mAh并联电池。一共3.7v 6800mAh。 ==IPEX座子== 由于拆装IPEX座子比较小，很容 ==静电==")
• 14:13, 18 November 2022 C2h2 talk contribs created page Photonicat Google TV连接 (Created page with "==早起Chromecast 与 板载Wifi 问题== 板载wifi 由于厂商驱动问题，无法wifi clients 对联，可以使用Wifi6模块或其他Wifi AP连接 ==google tv wifi问题== google tv 如果有连接不上，有可能NTP服务器问题，可以尝试将 time.android.com 的ip 指向 203.107.6.88, 后期可以改手动设置google tv 时间。 可以参考：https://www.youtube.com/watch?v=69PJqrnhBsA")
• 19:57, 10 November 2022 C2h2 talk contribs created page Photonicat Tesla Wifi 推荐设置 (Created page with "推荐使用 Wifi6 AX 5GHz 或者 AC 5GHz 如果早期Tesla搜索不到wifi，推荐尝试设置<code>channel 149</code>")
• 16:48, 25 October 2022 C2h2 talk contribs created page Photonicat Debian Docker (Created page with "由于比较复杂的iptables需求，openwrt 下docker 有网络出错的风险， 目前docker 只在debian下提供。")
• 16:43, 25 October 2022 C2h2 talk contribs created page Photonicat 网络共享/samba4 (Created page with "Luci 配置有时候存在一定问题，目前可以通过修改以下配置文件： mkdir /share vim /etc/samba/smb.conf 最后添加： <pre> [share] comment = Guest access share path = /share browseable = yes read only = no guest ok = yes </pre>")
• 11:57, 17 October 2022 C2h2 talk contribs created page Photonicat Android (Created page with "Android 11 可以通过SD卡启动，或通过A-to-A刷机。 images可以在 https://dl.photonicat.com/ 下载。。可参考Photonicat_刷机操作手册 进行刷机。 例如：https://dl.photonicat.com/images/BOARDCONFIG-RK3568-PHOTONICAT-ANDROID11-DDR4-GPT-20220811-0000.img.gz Android 11 需要4GB DDR和较大的emmc，支持各种视屏播放，apk安装等，满足广告机等应用。目前4G/5G 支持还在开发。")
• 11:51, 17 October 2022 C2h2 talk contribs created page Photonicat Debain 瘦身客户端，家用服务器 (Created page with "Debian 对于想要开发应用的客户，可以通过SD卡启动，或通过A-to-A刷机。 images可以在 https://dl.photonicat.com/ 下载。 Debain 可以支持NPU AI加速、QT、或其他应用。")
• 11:44, 17 October 2022 C2h2 talk contribs created page Photonicat 4G/5G 家庭网络备份 (Created page with "有4G/5G modem 的光影猫，默认自动可以连接蜂窝网络，也可以WAN 连接，并优先使用WAN。 采用的机制是Multiwan 自动检测。")
• 11:41, 17 October 2022 C2h2 talk contribs created page Photonicat wifi网卡WAN/LAN同时使用 (Created page with "Photonicat 板载的Wifi 可以同时建立WAN和LAN的链接。 ==方法== *前往：http://172.16.0.1/cgi-bin/luci/admin/network/wireless *按添加，并加入已有wifi SSID *将加入wifi SSID的设置为WAN *将AP作为LAN")
• 11:34, 17 October 2022 C2h2 talk contribs moved page Photonicat SD启动 to Photonicat SD启动、更新
• 11:22, 17 October 2022 C2h2 talk contribs created page File:Dl.photonicat.com images.png
• 11:22, 17 October 2022 C2h2 talk contribs uploaded File:Dl.photonicat.com images.png
• 11:21, 17 October 2022 C2h2 talk contribs created page Photonicat 固件 Changelog (Created page with "固件下载地址： https://dl.photonicat.com/images/ ==2022-07== *第一版本 ==2022-08== *加入4G/5G/LAN 自动multiwan 切换 ==2022-09== *改善对于4G/5G 的支持 ==2022-10== *加入MT7921/MT7921K 自动wifi6 识别 *优化缩短了启动时间")
• 13:05, 9 October 2022 C2h2 talk contribs created page File:Wifi6 settings.png
• 13:05, 9 October 2022 C2h2 talk contribs uploaded File:Wifi6 settings.png
• 13:04, 9 October 2022 C2h2 talk contribs created page File:Dual wifi.png
• 13:04, 9 October 2022 C2h2 talk contribs uploaded File:Dual wifi.png
• 13:02, 9 October 2022 C2h2 talk contribs created page File:Wifi6 iperf3.png
• 13:02, 9 October 2022 C2h2 talk contribs uploaded File:Wifi6 iperf3.png
• 12:22, 9 October 2022 C2h2 talk contribs created page File:Gpio pins pic.jpg
• 12:22, 9 October 2022 C2h2 talk contribs uploaded File:Gpio pins pic.jpg
• 12:12, 9 October 2022 C2h2 talk contribs created page Photonicat GPIO扩展说明 (Created page with "Photonicat 的PCBA上提供了一些可扩展的GPIO或 其他功能口，可以用于扩展其他爱好者433Mhz模块或其他应用。 500px")
• 12:11, 9 October 2022 C2h2 talk contribs created page File:Gpio pins.png
• 12:11, 9 October 2022 C2h2 talk contribs uploaded File:Gpio pins.png
• 21:58, 8 October 2022 C2h2 talk contribs created page Photonicat 端口转发 (Created page with "Photonicat 支持比较灵活的端口转发： 500px ==方法== #登陆 http://172.16.0.1:8080/cgi-bin/luci/admin/network/firewall/forwards #添加所需要的网络转发 LAN口的客户默认可以访问WAN口的所打开端口转发 ==DMZ== DMZ模式 = 所有 1-65535 的端口都指向于LAN的一个IP上")

(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)