Photonicat 编译 OpenWRT, Debian

From Photonicat Wiki
Revision as of 17:41, 18 September 2022 by C2h2 (talk | contribs) (→‎OpenWRT)
Jump to navigation Jump to search

Debian

Host System Requirements

Debian 11 (bullseye) or Ubuntu 20.04.

Compiling Requirements

On Debian/Ubuntu systems, install the packages:

sudo apt-get install build-essential flex bison genext2fs

Get repo files

Get repo files from Github:

git clone https://github.com/photonicat/rockchip_rk3568_linux_sdk -b debian --single-branch rk3568-linux-sdk
cd rk3568-linux-sdk
git submodule update --init

Install live build packages

Install live build packages if not installed yet:

sudo dpkg -i debian/ubuntu-build-service/packages/*.deb
sudo apt-get install -f

Config build target

Run the command below:

./rk3568-config-photonicat-debian.sh

Build system image

Run the command below:

./build.sh

The output path is rockdev, system image path is rockdev/pack

Install system image to the eMMC on board

Set the board to firmware update mode, connect USB OTG port to PC, and use the command below:

sudo tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool uf rockdev/pack/BOARDCONFIG-RK3568-PHOTONICAT-DEBIAN-DDR4-GPT-IMAGE_DATE-IMAGE_TIME.img #Replace IMAGE_DATE and IMAGE_TIME with the one you get.

OpenWRT

Host System Requirements

Debian 11 (bullseye) or Ubuntu 20.04/22.04, other distributions may work but not tested.

Compiling Requirements

Please a NORMAL USER, not root

On Debian/Ubuntu systems, install the packages:

sudo apt update
sudo apt install build-essential flex bison genext2fs \
    ccache ecj fastjar file g++ gawk gettext git \
    java-propose-classpath libelf-dev libncurses5-dev \
    libncursesw5-dev libssl-dev python2.7-dev python3 \
    unzip wget python3-distutils python3-setuptools python3-dev \
    rsync subversion swig time xsltproc zlib1g-dev #python #if needed

Get repo files

Get repo files from Github:

git clone https://github.com/photonicat/rockchip_rk3568_linux_sdk -b openwrt --single-branch rk3568-linux-sdk
cd rk3568-linux-sdk
git submodule update --init

Config build target

Run the command below:

./rk3568-config-photonicat-openwrt.sh

Build system image

Run the command below:

./build.sh

The output path is rockdev, system image path is rockdev/pack

Install system image to the eMMC on board

Set the board to firmware update mode, connect USB OTG port to PC, and use the command below:

sudo tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool uf rockdev/pack/BOARDCONFIG-RK3568-PHOTONICAT-OPENWRT-DDR4-GPT-IMAGE_DATE-IMAGE_TIME.img #Replace IMAGE_DATE and IMAGE_TIME with the one you get.