Photonicat 2 固件 Changelog - 版本历史

C2h2：r7924: note RTL8211F ALDPS, slightly more detail

2026-10-02T14:38:53Z

r7924: note RTL8211F ALDPS, slightly more detail

←上一版本		2026年10月2日 (五) 22:38的版本
第160行：		第160行：
	== 2026-10-01 r7924 ==		== 2026-10-01 r7924 ==

	* '''~~Your settings~~ survive an upgrade''' — power mode, menus, fan, SMS, call history, traffic stats, power schedules, car mode, the charge limit and the ~~modem's access settings~~ are ~~kept~~. ~~You are still logged out~~, and the ~~large~~ map caches are still cleared.		* '''Settings survive an upgrade''' — power mode, menus, fan, SMS, call history, traffic stats, power schedules, car mode, the charge limit and the APN are now in keep.d, so sysupgrade no longer wipes them. Login sessions and the map caches are still cleared.
	* '''Power schedules run ~~at the~~ time ~~you set~~''' — ~~no longer~~ 8 hours late ~~in CST, early-morning~~ events ~~fall~~ on the ~~right~~ day, and the ~~list shows up~~ right after boot.		* '''Power schedules run on local time''' — pcat-manager treated local time as UTC, so CST was 8 hours late and events at 00:00–07:59 fell on the wrong day. It now reads /etc/TZ and shifts the weekday with the clock. The saved schedule is readable from the MCU right after boot.
	* '''Plug in a cable and the port works immediately''' — a cold boot ~~no longer looks like a dead port~~. The default is ~~now always~~ on; a per-port choice you made is left alone.		* '''Plug in a cable and the port works immediately''' — eth-powersave now uses the RTL8211F's own ALDPS, instead of switching the port off and probing it on a timer. An idle PHY sleeps on its own and wakes as soon as a cable is inserted, including after a cold boot. The default is on; a per-port choice you made is left alone.
	* '''~~On mobile data, devices behind the router~~ get a public IPv6 address.''' ~~Incoming~~ connections ~~stay blocked until you allow them~~. An upgrade that keeps a network config you edited will not switch to this on its own.		* '''LAN clients get a public IPv6 address on cellular''' — the cellular interfaces set extendprefix (RFC 7278) and hand the bearer's /64 to the LAN. The firewall still rejects inbound connections. Wired WAN is unchanged. An upgrade that keeps a network or firewall config you edited will not switch to this on its own.
	* '''FM350 5G connects and stays up''' — a drop in weak signal reconnects immediately, and the network mode and bands ~~you pick in~~ the web UI ~~take effect~~.		* '''FM350 5G SA connects and stays up''' — data is dialled on cid 5 with the real APN, instead of sitting on LTE and redialling on a timer. A drop in weak signal reconnects immediately, and the network mode and bands from the web UI are written and applied.
	* '''Wi-Fi''' — upstream ~~Wi-Fi~~, and a ~~hotspot name~~ and password ~~you changed,~~ are ~~still there after a reboot~~. The PCIe card is detected ~~again~~ and recovers in about 20 seconds after a brief dropout. Upstream Wi-Fi accepts a MAC ~~address you choose~~. The ~~switches on~~ Device Control ~~work~~, and WPA3 is offered ~~when~~ the ~~card~~ supports it. Idle shutdown ~~no longer powers off while devices are connected~~.		* '''Wi-Fi''' — boot no longer deletes the upstream STA as a duplicate USB radio, and a changed SSID and password are no longer wiped. The WCN7850 firmware is no longer stripped at install, so the PCIe card is detected and recovers in about 20 seconds after a brief dropout. Upstream Wi-Fi accepts a chosen MAC. The Device Control switches take effect, and WPA3-SAE is offered where the radio supports it. Idle shutdown does not start counting down when the client count cannot be read.
	* '''A hotel ~~cable~~ can be signed in''' — when another ~~connection~~ already ~~has internet~~, tap "login required" in the priority table ~~to give~~ that cable 15 minutes ~~to open~~ its login page.		* '''A hotel portal can be signed in''' — when another uplink is already online, tap "login required" in the priority table and that cable becomes the egress for 15 minutes, so its login page can open.
	* '''The statistics page is rebuilt''' — ~~live speed~~, wired and ~~mobile~~ side by side, CPU, memory, ~~disks~~, and every ~~device online~~.		* '''The statistics page is rebuilt''' — a throughput chart of the last 5 minutes, wired and cellular side by side, per-core CPU, memory, eMMC / SD / NVMe / USB, and every DHCP client.
	* '''The ~~light~~ and beeper follow the hours you set.''' Each of the two checks on the small screen can be ~~a connection test~~ or ~~a web test, not only ping~~.		* '''The LED and beeper follow the hours you set''' — the MCU clock is set every hour, and the schedule is checked every 10 minutes and pushed again if it does not match. Each of the two checks on the small screen can be ICMP, TCP, HTTP or HTTPS.
	* '''~~The DNS program~~ is updated to 2.93''', including ~~security fixes~~. Wired or Wi-Fi has to stay up or down for about 9 seconds before ~~mobile data~~ is stopped or ~~started~~.		* '''dnsmasq is updated to 2.93''', including the DNSSEC KeyTrap fix. Wired or Wi-Fi has to stay up or down for about 9 seconds before cellular is stopped or brought back.

	== APK version ==		== APK version ==
	* Under testing, releasing soon.		* Under testing, releasing soon.

C2h2：r7924 date 2026-10-01; APK build still in testing

2026-10-02T14:30:44Z

r7924 date 2026-10-01; APK build still in testing

←上一版本		2026年10月2日 (五) 22:30的版本
第158行：		第158行：
	* '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.		* '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.

	== 2026-10-02 r7924 ==		== 2026-10-01 r7924 ==

	* '''Your settings survive an upgrade''' — power mode, menus, fan, SMS, call history, traffic stats, power schedules, car mode, the charge limit and the modem's access settings are kept. You are still logged out, and the large map caches are still cleared.		* '''Your settings survive an upgrade''' — power mode, menus, fan, SMS, call history, traffic stats, power schedules, car mode, the charge limit and the modem's access settings are kept. You are still logged out, and the large map caches are still cleared.
第171行：		第171行：
	* '''The DNS program is updated to 2.93''', including security fixes. Wired or Wi-Fi has to stay up or down for about 9 seconds before mobile data is stopped or started.		* '''The DNS program is updated to 2.93''', including security fixes. Wired or Wi-Fi has to stay up or down for about 9 seconds before mobile data is stopped or started.

	== ~~2026-08-14 r7902 (26.10.0)~~ ==		== APK version ==
	* '''OpenWRT base system''' - Update to 26.10.0，completely migrate to OpenWRT 25.12 as base system. Install fw4 as default firewall. Package management system now switches to APK (IPK packages are not supported since this release).		* Under testing, releasing soon.
	* '''Backport photonicat (v1) support''' - Now all photonicat products use the same source tree.
	* '''Kernel''' - Update to 6.12.103. Update ath12k firmware, ~~AIC8800 driver. Backport mainline DFI (RK3576) and SGMII (RK3568) driver.~~
	* '''pcat-manager''' - Fix incorrect timezone calculation in schedule tasks.

C2h2：Changelog: Photonicat 2 r7924

2026-10-02T14:28:22Z

Changelog: Photonicat 2 r7924

@@ 第157行： / 第157行： @@
 * '''Car mode''' — a manual shutdown with DC power still plugged in no longer bounces straight back on.
 * '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.
 == 2026-08-14 r7902 (26.10.0) ==

2026年9月30日 (三) 06:11 Monstercat

2026-09-30T06:11:22Z

←上一版本		2026年9月30日 (三) 14:11的版本
第157行：		第157行：
	* '''Car mode''' — a manual shutdown with DC power still plugged in no longer bounces straight back on.		* '''Car mode''' — a manual shutdown with DC power still plugged in no longer bounces straight back on.
	* '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.		* '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.

			== 2026-08-14 r7902 (26.10.0) ==
			* '''OpenWRT base system''' - Update to 26.10.0，completely migrate to OpenWRT 25.12 as base system. Install fw4 as default firewall. Package management system now switches to APK (IPK packages are not supported since this release).
			* '''Backport photonicat (v1) support''' - Now all photonicat products use the same source tree.
			* '''Kernel''' - Update to 6.12.103. Update ath12k firmware, AIC8800 driver. Backport mainline DFI (RK3576) and SGMII (RK3568) driver.
			* '''pcat-manager''' - Fix incorrect timezone calculation in schedule tasks.

C2h2：r7907 MCU Changes: state latest MCU firmware version RA2E1260813002

2026-08-14T11:12:38Z

r7907 MCU Changes: state latest MCU firmware version RA2E1260813002

←上一版本		2026年8月14日 (五) 19:12的版本
第152行：		第152行：
	* '''Bluetooth''' — the AIC8800's Bluetooth is now built in BlueZ mode so a standard HCI adapter appears, and a new Bluetooth panel on the /dev page can diagnose the adapter and scan for nearby devices.		* '''Bluetooth''' — the AIC8800's Bluetooth is now built in BlueZ mode so a standard HCI adapter appears, and a new Bluetooth panel on the /dev page can diagnose the adapter and scan for nearby devices.
	=== MCU Changes ===		=== MCU Changes ===
			Latest MCU firmware version: <code>RA2E1260813002</code>.

	* '''Raise-to-wake now responds in 1–2 seconds''' — confirmation uses a leaky integrator, so hand tremor no longer restarts the detection pipeline; a knock on the desk no longer fakes a pick-up.		* '''Raise-to-wake now responds in 1–2 seconds''' — confirmation uses a leaky integrator, so hand tremor no longer restarts the detection pipeline; a knock on the desk no longer fakes a pick-up.
	* '''Car mode''' — a manual shutdown with DC power still plugged in no longer bounces straight back on.		* '''Car mode''' — a manual shutdown with DC power still plugged in no longer bounces straight back on.
	* '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.		* '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.

C2h2：r7907: add MCU Changes subsection

2026-08-14T11:05:08Z

r7907: add MCU Changes subsection

←上一版本		2026年8月14日 (五) 19:05的版本
第151行：		第151行：
	* '''Mini display and screen''' — a proxy's fake-IP DNS answers no longer fail both LCD ping rows; auto-dim delays can be edited in seconds, minutes or hours; the live screen preview refreshes at 1 Hz and can no longer freeze; car mode shows the configured timeout instead of a made-up 10 minutes.		* '''Mini display and screen''' — a proxy's fake-IP DNS answers no longer fail both LCD ping rows; auto-dim delays can be edited in seconds, minutes or hours; the live screen preview refreshes at 1 Hz and can no longer freeze; car mode shows the configured timeout instead of a made-up 10 minutes.
	* '''Bluetooth''' — the AIC8800's Bluetooth is now built in BlueZ mode so a standard HCI adapter appears, and a new Bluetooth panel on the /dev page can diagnose the adapter and scan for nearby devices.		* '''Bluetooth''' — the AIC8800's Bluetooth is now built in BlueZ mode so a standard HCI adapter appears, and a new Bluetooth panel on the /dev page can diagnose the adapter and scan for nearby devices.
			=== MCU Changes ===

			* '''Raise-to-wake now responds in 1–2 seconds''' — confirmation uses a leaky integrator, so hand tremor no longer restarts the detection pipeline; a knock on the desk no longer fakes a pick-up.
			* '''Car mode''' — a manual shutdown with DC power still plugged in no longer bounces straight back on.
			* '''Battery groundwork''' — added a coulomb-meter test harness and machine-learned LFP state-of-charge work, groundwork for further battery-percentage accuracy improvements.

C2h2：/* 2026-08-14 r7907 */

2026-08-14T11:02:46Z

2026-08-14 r7907

←上一版本		2026年8月14日 (五) 19:02的版本
第141行：		第141行：
	== 2026-08-14 r7907 ==		== 2026-08-14 r7907 ==

	* '''Bluetooth (early support)''' — the AIC8800's Bluetooth is now built in BlueZ mode so a standard HCI adapter appears, and a new Bluetooth panel on the /dev page can diagnose the adapter and scan for nearby devices.
	* '''LXC containers''' — containers now survive a firmware upgrade; added container backup/restore, image downloads that recover from a flaky CDN, self-healing of the network bridge on start, and a Proxmox-style resizable console popup; fixed CPU/memory bars showing empty.		* '''LXC containers''' — containers now survive a firmware upgrade; added container backup/restore, image downloads that recover from a flaky CDN, self-healing of the network bridge on start, and a Proxmox-style resizable console popup; fixed CPU/memory bars showing empty.
	* '''GPS''' — trip odometer on the web GPS page and the mini display, and map tiles fall back to mirror servers when the main tile server is blocked.		* '''GPS''' — trip odometer on the web GPS page and the mini display, and map tiles fall back to mirror servers when the main tile server is blocked.
第151行：		第150行：
	* '''LED/beeper schedules''' — schedule delivery to the MCU is now verified end-to-end, degrading gracefully instead of failing silently.		* '''LED/beeper schedules''' — schedule delivery to the MCU is now verified end-to-end, degrading gracefully instead of failing silently.
	* '''Mini display and screen''' — a proxy's fake-IP DNS answers no longer fail both LCD ping rows; auto-dim delays can be edited in seconds, minutes or hours; the live screen preview refreshes at 1 Hz and can no longer freeze; car mode shows the configured timeout instead of a made-up 10 minutes.		* '''Mini display and screen''' — a proxy's fake-IP DNS answers no longer fail both LCD ping rows; auto-dim delays can be edited in seconds, minutes or hours; the live screen preview refreshes at 1 Hz and can no longer freeze; car mode shows the configured timeout instead of a made-up 10 minutes.
			* '''Bluetooth''' — the AIC8800's Bluetooth is now built in BlueZ mode so a standard HCI adapter appears, and a new Bluetooth panel on the /dev page can diagnose the adapter and scan for nearby devices.

C2h2：Add 2026-08-14 r7907 release notes (r7897 → r7907)

2026-08-14T11:00:29Z

Add 2026-08-14 r7907 release notes (r7897 → r7907)

←上一版本		2026年8月14日 (五) 19:00的版本
第138行：		第138行：
	* '''You can now mount an SMB share''', and the NFS server can actually export one.		* '''You can now mount an SMB share''', and the NFS server can actually export one.
	* '''Fixed eMMC partitioning failures''', and NTFS drives now mount correctly.		* '''Fixed eMMC partitioning failures''', and NTFS drives now mount correctly.

			== 2026-08-14 r7907 ==

			* '''Bluetooth (early support)''' — the AIC8800's Bluetooth is now built in BlueZ mode so a standard HCI adapter appears, and a new Bluetooth panel on the /dev page can diagnose the adapter and scan for nearby devices.
			* '''LXC containers''' — containers now survive a firmware upgrade; added container backup/restore, image downloads that recover from a flaky CDN, self-healing of the network bridge on start, and a Proxmox-style resizable console popup; fixed CPU/memory bars showing empty.
			* '''GPS''' — trip odometer on the web GPS page and the mini display, and map tiles fall back to mirror servers when the main tile server is blocked.
			* '''Web terminal''' — /terminal is now a real WebSocket console (via granian ASGI) instead of polling, with a cleaner full-screen console popup.
			* '''Safer firmware updates''' — the web UI can no longer reboot the device mid-flash, the update screen shows a realistic 3–5 minute estimate with a restarting overlay, and power-off is available from the user menu.
			* '''Networking fixes''' — upstream WiFi gets a boot grace period so one failed probe right after boot no longer bounces the egress; the connectivity probe now works behind transparent proxies (e.g. OpenClash); cellular interfaces dialled manually through netifd are left alone; hotspot settings survive the firmware regenerating the config.
			* '''Smaller root filesystem''' — multimedia applications, Realtek wireless drivers and other rarely-used packages are now optional modules instead of preinstalled, more kernel modules are available to install, and the BPF traffic scheduler (<code>kmod-sched-bpf</code>) is enabled.
			* '''RK3576 platform fixes''' — backported upstream device-tree fixes for Photonicat 2 and added the missing CPU cache-hierarchy description.
			* '''LED/beeper schedules''' — schedule delivery to the MCU is now verified end-to-end, degrading gracefully instead of failing silently.
			* '''Mini display and screen''' — a proxy's fake-IP DNS answers no longer fail both LCD ping rows; auto-dim delays can be edited in seconds, minutes or hours; the live screen preview refreshes at 1 Hz and can no longer freeze; car mode shows the configured timeout instead of a made-up 10 minutes.

C2h2：Note improved upstream Wi-Fi stability

2026-08-11T11:42:08Z

Note improved upstream Wi-Fi stability

←上一版本		2026年8月11日 (二) 19:42的版本
第108行：		第108行：

	* '''Failover now works on the default setting''' — most devices had never migrated to the current routing system.		* '''Failover now works on the default setting''' — most devices had never migrated to the current routing system.
	* '''~~Your~~ network name and password ~~no longer disappear''' after using~~ the ~~upstream Wi-Fi~~ relay~~, and turning it~~ off ~~restores your own name~~.		* '''Improved upstream Wi-Fi — more stable''' — your own network name and password are kept across a reboot and restored when you turn the relay off.
	* '''Add-on PCIe Wi-Fi cards work straight after a flash''', with no extra reboots or manual enabling.		* '''Add-on PCIe Wi-Fi cards work straight after a flash''', with no extra reboots or manual enabling.
	* '''Fixed per-client traffic statistics on AIC8800 Wi-Fi''', now also visible in the web UI.		* '''Fixed per-client traffic statistics on AIC8800 Wi-Fi''', now also visible in the web UI.

C2h2：Web interface: note werkzeug to granian migration

2026-08-11T11:39:18Z

Web interface: note werkzeug to granian migration

←上一版本		2026年8月11日 (二) 19:39的版本
第124行：		第124行：
	=== Web interface ===		=== Web interface ===

	* '''~~Much~~ faster, and ~~no longer freezes''' for 18–24 seconds every 25 seconds~~.		* '''Switched from the werkzeug development server to granian''', which parses HTTP in Rust — pages and files load several times faster, and static files are served without entering Python at all.
	* '''Language and light/dark are now device-wide''', not per browser, with a reset button.		* '''Language and light/dark are now device-wide''', not per browser, with a reset button.
	* '''Colour picker for display themes''', and the reboot screen now reloads itself when the device is back.		* '''Colour picker for display themes''', and the reboot screen now reloads itself when the device is back.

Photonicat 2 固件 Changelog - 版本历史

C2h2：​r7924: note RTL8211F ALDPS, slightly more detail

C2h2：​r7924 date 2026-10-01; APK build still in testing

C2h2：​Changelog: Photonicat 2 r7924

2026年9月30日 (三) 06:11 Monstercat

C2h2：​r7907 MCU Changes: state latest MCU firmware version RA2E1260813002

C2h2：​r7907: add MCU Changes subsection

C2h2：​/* 2026-08-14 r7907 */

C2h2：​Add 2026-08-14 r7907 release notes (r7897 → r7907)

C2h2：​Note improved upstream Wi-Fi stability

C2h2：​Web interface: note werkzeug to granian migration