查看“︁Photonicat 刷Modem模块固件”︁的源代码
←
Photonicat 刷Modem模块固件
跳转到导航
跳转到搜索
因为以下原因，您没有权限编辑该页面：
您请求的操作仅限属于该用户组的用户执行：
用户
您可以查看和复制此页面的源代码。
=Modem 固件更新 Firmware Update= 刷固件时，请保持电量充足>50%，并插入充电器。用Linux 终端方式或网页TTYD进行一下操作.</br> Please DON'T POWER OFF the device during the firmware updating! And make sure your device has plugged-in and has enough battery (above 50%). Use linux terminal(TTYD) to finish ===4G 模块：Quectel EM05=== cd /tmp wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz tar -xzf Quectel-EM05-update.tar.gz cd Quectel-EM05-update ./update.sh ===5G 模块：Quectel RM500U=== {| class="wikitable" style="width:100%; background-color:#fff3cd; border:2px solid #d39e00;" |- | style="padding:12px;" | '''⚠️ 警告：本节 RM500U 固件教程已被隐藏 / WARNING: this RM500U firmware guide has been hidden''' 本教程中的 RM500U 固件为 '''500UCN 的早期版本'''。目前市面上还存在 '''500UCN 阉割版'''、'''500UCNV''' 等多个不同型号的模块，用户往往无法确认自己手中模块的确切版本。已有多台设备因刷入不匹配的固件而 '''变砖（无法启动）'''。因此本教程默认隐藏，'''不建议升级'''。 The RM500U firmware below is an '''early version of 500UCN'''. There are now several other variants on the market (the '''500UCN cut-down edition''', '''500UCNV''', etc.), and you usually cannot be sure which one you have. Several devices have already been '''BRICKED''' by flashing mismatched firmware. This guide is therefore hidden by default and '''upgrading is NOT recommended'''. |} <div class="mw-collapsible mw-collapsed" data-expandtext="⚠️ 我已了解上述风险，点此显示教程 / I understand the risk — show the guide" data-collapsetext="隐藏教程 / Hide the guide"> cd /tmp wget https://dl.photonicat.com/firmware/RM500U-update.tar.gz tar -xzf RM500U-update.tar.gz cd RM500U-update ./update.sh ;样例 <pre> root@photonicat-openwrt:~# cd /tmp/ root@photonicat-openwrt:/tmp# wget https://dl.photonicat.com/firmware/RM500U-update.tar.gz --2023-02-15 12:34:32-- https://dl.photonicat.com/firmware/RM500U-update.tar.gz Resolving dl.photonicat.com... 217.76.52.184, 2a02:c206:2118:1178::1 Connecting to dl.photonicat.com|217.76.52.184|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 62502798 (60M) [application/gzip] Saving to: 'RM500U-update.tar.gz' RM500U-update.tar.gz 100%[==================================================>] 59.61M 13.5MB/s in 9.1s 2023-02-15 12:34:45 (6.57 MB/s) - 'RM500U-update.tar.gz' saved [62502798/62502798] root@photonicat-openwrt:/tmp# tar -xzf RM500U-update.tar.gz root@photonicat-openwrt:/tmp# cd RM500U-update root@photonicat-openwrt:/tmp/RM500U-update# ./update.sh Terminating programs using the Modem... Firmware update started. [000:000] Version: QDloader_Linux_Android_V1.0.0 [000:000] scan quectel modem /sys/bus/usb/devices/7-1 2c7c/900/404 open(/dev/bus/usb/007/003) = 4 [000:004] AT > AT+QDownLOAD=1 [000:007] AT < Quectel [000:007] AT < RM500U-CN [000:007] AT < Revision: RM500UCNAAR01A18M2G [000:007] AT < OK [000:011] AT < +EGMR: "MPQ22KJ060018670P" [000:011] AT < OK [000:014] AT < +EGMR: "868227050984830" [000:014] AT < OK [000:017] AT < OK bluk in = -1, errno: 71 (Protocol error) [001:189] scan quectel modem /sys/bus/usb/devices/7-1 1782/4d00/2430 open(/dev/bus/usb/007/004) = 4 [004:621] Version: BP_R1.0.0 [004:621] ProductName: udx710-module [004:621] ProductVersion: [004:621] szPrdAlias: udx710-module [004:626] > BSL_CMD_CHECK_BAUD [004:626] < BSL_REP_VER [004:626] > BSL_CMD_CONNECT [004:627] Flash FDL [004:627] > BSL_CMD_START_DATA [004:645] > BSL_CMD_END_DATA [004:646] > BSL_CMD_EXEC_DATA [004:646] > BSL_CMD_CHECK_BAUD [004:646] < BSL_REP_VER [004:646] > BSL_CMD_CONNECT [004:646] Flash FDL2 [004:646] > BSL_CMD_START_DATA [004:693] > BSL_CMD_END_DATA [004:693] > BSL_CMD_EXEC_DATA [004:835] < BSL_REP_INCOMPATIBLE_PARTITION [004:835] > BSL_CMD_DISABLE_TRANSCODE [004:836] Backup NV_NR -> '/tmp/quectel_back_NV_NR' [004:836] > BSL_CMD_START_READ {PSCP, 58, 4100520} {NRCP, 3e9200, 2048} {V3PHY, 3e9a00, 2048} [012:609] > BSL_CMD_END_READ [012:609] > BSL_CMD_REPARTITION [012:866] Flash NV_NR [012:929] > BSL_CMD_START_DATA [014:250] > BSL_CMD_END_DATA [016:493] Erase EraseSPL [016:493] > BSL_CMD_ERASE_FLASH [016:510] skip download FileID: ProdNV [016:510] skip download FileID: PhaseCheck [016:510] Erase project [016:510] > BSL_CMD_ERASE_FLASH [016:524] < BSL_REP_INCOMPATIBLE_PARTITION [016:524] Erase EraseUBOOT [016:524] > BSL_CMD_ERASE_FLASH [016:591] Flash SML [016:591] > BSL_CMD_START_DATA [016:662] > BSL_CMD_END_DATA [016:769] Flash UBOOTLoader [016:769] > BSL_CMD_START_DATA [016:888] > BSL_CMD_END_DATA [017:252] Flash BOOT [017:252] > BSL_CMD_START_DATA [017:817] > BSL_CMD_END_DATA [021:549] Flash Modem_NR_PMSYS [021:549] > BSL_CMD_START_DATA [021:625] > BSL_CMD_END_DATA [021:625] Flash Modem_NR_AGDSP [021:625] > BSL_CMD_START_DATA [021:889] > BSL_CMD_END_DATA [023:381] Erase FLASH_NR [023:381] > BSL_CMD_ERASE_FLASH [023:764] Flash Modem_NR [023:765] > BSL_CMD_START_DATA [024:788] > BSL_CMD_END_DATA [031:084] Flash Modem_NR_V3PHY [031:084] > BSL_CMD_START_DATA [031:279] > BSL_CMD_END_DATA [032:450] Flash Modem_NR_PHY [032:450] > BSL_CMD_START_DATA [032:519] > BSL_CMD_END_DATA [032:959] Flash Modem_NR_DSP1 [032:959] > BSL_CMD_START_DATA [033:000] > BSL_CMD_END_DATA [033:221] Flash Modem_NR_DSP2 [033:221] > BSL_CMD_START_DATA [033:266] > BSL_CMD_END_DATA [033:535] Flash Modem_NR_DELTANV [033:535] > BSL_CMD_START_DATA [033:602] > BSL_CMD_END_DATA [033:602] Flash Recovery [033:602] > BSL_CMD_START_DATA [034:202] > BSL_CMD_END_DATA [037:697] Flash Recoveryfs [037:697] > BSL_CMD_START_DATA [039:396] > BSL_CMD_END_DATA [039:396] Flash System [039:396] > BSL_CMD_START_DATA [048:247] > BSL_CMD_END_DATA [048:247] Erase Data [048:247] > BSL_CMD_ERASE_FLASH [048:319] Flash UserData [048:319] > BSL_CMD_START_DATA [048:666] > BSL_CMD_END_DATA [048:666] Erase EraseMisc [048:666] > BSL_CMD_ERASE_FLASH [048:741] Flash SPLLoader [048:741] > BSL_CMD_START_DATA [048:761] > BSL_CMD_END_DATA [048:893] > BSL_CMD_NORMAL_RESET [048:903] Upgrade module successfully Firmware updated OK, reboot... </pre> </div> ==注意注意== '''！！！我们仅提供升级教程，如遇到模块升级后机器不识别或者无法工作我们不承担任何责任，请谨慎操作！！！''' '''若无特殊需求不建议升级模块固件。'''
返回
Photonicat 刷Modem模块固件
。
导航菜单
个人工具
登录
命名空间
页面
讨论
大陆简体
查看
阅读
查看源代码
查看历史
更多
搜索
导航
首页
最近更改
随机页面
MediaWiki帮助
特殊页面
工具
链入页面
相关更改
页面信息