Sl
Hi Team!
The r7907 firmware has several Wi-Fi-related bugs:
Bugs
- In the PCIe Wi-Fi card settings, after a clean install, encryption is set to WPA3-SAE by default. However, after selecting a frequency, this option disappears, leaving only WPA2-PSK or NONE available.
- In the PCAT2 web interface, there is no option to select any encryption type other than WPA2-PSK.
- Wi-Fi settings sometimes reset to default values, including the default network name and password. This often happens when the Wi-Fi card is disabled and reenabled.
- When PCAT2 operates in Wi-Fi Upstream mode, clients connected to the other Wi-Fi card are not detected (shown as "0 Connected"), which triggers the "No WiFi Client Auto-Shutdown" action.
Feature request
- When configuring Upstream Wi-Fi, there is an option to use a Private MAC address, but no way to set a custom MAC address manually. Please add this option. It would be useful in cases such as connecting PCAT2 to a Wi-Fi hotspot using the MAC address of another device that is already authorized, or similar scenarios.